Arkadaslar, baska bir ingiliz sitesinde stad nasil yapilir tutorial'i buldum. Baska sitelere link vermek yasak oldugu icin buraya kopyaliyorum. First, let's get a stadium templatre. There are few available, but lets get the new one from: http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip Now, where do we start??? Well first deside what u want to build first. I will start of by starting to build a concrete floor. First you make a single mesh. How? Look here: http://www.totalclubmanager.com/forum/view...=24692&start=12 (IMG: http://img30.imageshack.us/img30/9287/st1.jpg ) Next you add texture to this mesh. Select Objects Properties the green, blue and red cirle above Prospective view. Click on the arow by object and select Material. in assing by click on basic and go to Texture bitmap. Chose your texture. it should look like this: (IMG: http://img30.imageshack.us/img30/6571/st2.jpg ) Next we are going to put that mesh on an engle. Highlight the mesh and go to front view and press Rotate 2-d button (IMG: http://img27.imageshack.us/img27/1993/st3.jpg ) point to one end of the mesh (the first point wont move) and the second to the the other end, now move the end to a desired height. (IMG: http://img30.imageshack.us/img30/700/676.jpg ) next I'm gona add a small base to the stadium and rais the floor. create a new mesh, but this time in Right view (IMG: http://img22.imageshack.us/img22/7832/715.jpg ) add texture, and move the mesh so it is at the begining of the angled mesh, move the angled mesh up anf it should look like this. (IMG: http://img23.imageshack.us/img23/5723/672.jpg ) next wee will add a fence. Go to right view and create a new mesh and add texture. I will also add a bend to the fence by creating a small mesh(same steps as adding angle to the floor). (IMG: http://img22.imageshack.us/img22/4568/732.jpg ) PS: you can add transperance to the textures by clicking Objects Properties & in transperancy I added 50. next in top view we will highlight all meshes made up to this point. and we will start copying the same group of selected meshes to make a long stand. click on copy (IMG: http://img26.imageshack.us/img26/5166/495.jpg ) point on the mesh and start copying till you are satisfied with the result. (IMG: http://img30.imageshack.us/img30/3897/697.jpg ) do the entire stand (IMG: http://img28.imageshack.us/img28/2691/641.jpg )

now we will add something for people to sit on. I wont do seats cause everybody easle is doing them so insted I will add wooden benches. make a new mesh that goes horizontaly and one that goes verticaly, add textures, (IMG: http://img21.imageshack.us/img21/3424/497.jpg ) copy and pase till the entire stand will full of benches (IMG: http://img22.imageshack.us/img22/5223/734.jpg ) lets see what it looks like so far. (IMG: http://img25.imageshack.us/img25/152/585.jpg ) (IMG: http://img25.imageshack.us/img25/8383/586.jpg ) so far so good! any coments? ideas? is this helping at all? Please let me know

now we will add a bend around the stadium and continue adding stands till the entire stadium is surounded. first sellest the entire stand, and copy the stand making shure that the stands touch. (IMG: http://img26.imageshack.us/img26/51/498.jpg ) now, highlight the part of the stand that you will want to bend. go to transform and select bend. and bend to the desired outcome. (IMG: http://img29.imageshack.us/img29/5058/637.jpg ) cut off any excess you dont want and repeat till the entire stadium is surounded. you can also add flags and baners by creating new mesh and adding textures. this is what we got so far (IMG: http://img22.imageshack.us/img22/8063/735.jpg ) and (IMG: http://img22.imageshack.us/img22/3614/736.jpg )

let's continue with the basic building guides. This time we are going to try to answer a question asked by rabcp: QUOTE Theres one part I cant figure out how do I leave a gap in the stand for an exit? However, before we start we must do one thing which we should have done before. LAYERS!!! Layers are important and at the same time help us keep things orginized. We should have layers for each parts of the stadiums that we build, ie: fance, addbords, seats, roof etc. To create a layer go to the red, white & blue pie just obove the prospective view (IMG: http://img22.imageshack.us/img22/82/st4.jpg ) this will open the layers box, asingh desired layers. (IMG: http://img22.imageshack.us/img22/3865/946.jpg ) I will post the gap in the stands in the next post. Now that we have layers and we added desireid layers, hide the layers that will be in our way, such as benches, baners etc. To do that, just click on the lightbulb in the layers box (IMG: http://img8.imageshack.us/img8/1830/18s.jpg ) The next step is going to be on how to create an entrance. The red line will represent where the players will run into the feild so we have to work around that area. First delite whatever meshes you dont want around the entry point. (IMG: http://img8.imageshack.us/img8/7349/3997.jpg ) and start adding meshes in between the spaces. and this is what I've got in the end (IMG: http://img8.imageshack.us/img8/7995/20b.jpg )

Galip ilk resim küfür aman hemen sil

Orjinal Mesajı Yazan: Necaty Galip ilk resim küfür aman hemen sil anlayamadim ne demek istedin simdi

bi de sunu biri turkceye cevirsin hemen stad yapalım:)

g_alip 2. link yani ilk resim de küfür var silsene bide türkçesi yokmu

iyi güzelde bunu nasıl download edicez yardım edin

Orjinal Mesajı Yazan: Canbomgs bide türkçesi yokmu ben ingiliz siteden aldim belki forum da baska biri türkçelestirmek ister

Stad yapmak için "rhino" programi lazim olacak simdi upload ediyorum

Stad yapma tutorial'i (ingilizce)

mete_kaan33

evet yaa bizde yapmak siteriz biz burda eşşek başımıyız :(

koyu_bordo

ya şu avni akeride yapın yapan cennete gidecek valla

bjklifatih

ben birkac kere denedim linkler calismiyor bazilari tavsiye etmek g-alip kusura bakma

ankarali

çok sağol g_alip kardeş böyle bir şeyi bizimle paylaştığın için Teşekkürler...

can_polat61

YA ARKADAŞLAR ŞU PROGRAM NASI KULLANILIYO YADA TÜRKÇESİ VARMI

« Önceki Sayfa